Gift InsideGOLF ($100 value for just $20!) this holiday season
Keep the triangle between your arms and shoulders intact during your chipping motion.
For most golfers, improving your chipping is one of the simplest ways to lower your score and build your confidence. First, you need to understand what a chip shot is: It’s a short game stroke where the ball carries into the air and then rolls and equal distance (or a slightly longer distance) than it carries. It has a lower ball flight and travels a shorter distance than a chip shot, which means it’s a lower-maintenance, more forgiving
Here’s how to do it right.
Good golf posture is when you bend forward from the hips and let your arms hang directly below your shoulders. Bowing forward like this creates a space, which in-effect pre-sets the path where your arms and club can swing. For some reason, many golfers get int a more squatty posture, which leads to inconsistent contact.
But good posture in your spin is the first step; once you have that, you can adjust your stance to suit the shot.
The putting and chipping motions are both related in that they require smaller stroke motions. Though your posture will remain relatively similar.
To get the desired result with your chipping clubs, make a few small adjustments to your stance and setup:
These, along with a good posture, will put you in position to guarantee the bottom of your stroke will occur after the golf ball for cleaner contact.
Chip shots should have some get airbone — at least for a short period of time. And to do that, remember the golden rule: Hit down to make the ball go up. Understanding this will help you make the proper stroke, and is also why it’s so important to keep your upper body tilted towards the target, because it’ll help you make a descending blow.
Like your putting stroke, a good chipping stroke will require your arms to stay relatively intact and quiet during the motion. Think about your arms and shoulders forming a triangle: Your goal is to keep that triangle intact while it moves throughout your motion.
As for the size of the stroke: It varies by person and the distance of the shot, but in most cases the club should always stay below hip level, relatively equal back and through. I do not like to see huge chipping strokes, because it can hurt the quality of your contact.
That said, I’ve seen golfers chip very will using a heavily wrist-y motion, and others who chip well using the opposite. Like most things in golf, it’s all a preference. You should determine what’s best for you based on what works.
One thing that doesn’t work for golfers is tension. It can hurt golfers’ ability to feel the clubhead, and can prevent the clubhead from falling naturally into the golf ball. As you grip the club, your wrists should be soft and relaxed enough to move around subtly, so the club can gently fall into the ground at impact.
For most shorter chips, your stance is narrow and your ball position will be back slightly. You don’t really have many options. But know that adjusting your ball position is a simple way of changing the height of your shots.
A more centered ball position will eliminate some forward shaft lean at setup, and launch the ball a bit higher. A ball position that’s more back will do the opposite, launching it lower with more spin. Use this general guideline to adjust based on your shot at-hand, and your own preferences.
Once you have good, solid fundamentals, you need to lean to control your distance.
There are plenty of options when it comes to calibrating your distances. My preferred method is to learn one basic stroke size that you are really comfortable with, and to simply change the club. This will alter the distance due to changing flight-to-roll rations.
My standard knee height-to-knee height chipping stroke with a gap wedge may travel 10 yards. With a pitching wedge, it’ll go 20 yards. A 9-iron may go 30 yards, 8-iron 40 yards, and 7-iron 50 yards. The ball will fly lower as you go up in clubs, but the advantage of this system is that your stroke will stay consistent.
A great test for your chipping setup is to practice with an alignment rod just outside your golf ball. If it does, your stroke could be moving too far from in-to-out, which could make it more likely you hit the heel of the club for the dreaded S-word: “Shank.”
It can be helpful to understand flight-to-roll rations when chipping. For example, does your ball fly 1/3rd of the distance, and then roll the other 2/3rds? Or the opposite?
You can get an idea of this by placing a tee or golf cluh 1/3rd of the way between your golf ball and the hole. Try to land your ball on that tee, and see how much it rolls afterwards. If it lands on the tee but doesn’t reach the hole, try a different club.
As you prepare yourself to take your best game to the golf course, it is really a great idea to hit a few chips and pitches
Even if it’s just warming up with a few chip shots on the driving range, it will help build that confidence when you do get to the course, and give you that feeling of good contact.
One of the quickest ways to lower your score is to be a great chipper. You don’t have to be big and strong and have the best golf swing to be a great chipper.
If you are a good chipper, and you miss the green, you have the confidence to make up for a missed shot.
If you are a good chipper, you take pressure off of your putting by being closer to the hole.
You can make this skill a great equalizer and lower your score and have more fun.
GOLF.com and GOLF Magazine are published by EB GOLF MEDIA LLC, a division of 8AM GOLF